Australian Motorcycle Components

BMW

A selection of product designed especially for your BMW

For model specific accessories select the model below, or for general products scroll down the page.

If you're looking at replacement seats the following is an e-mail from one our first Sargent Seat customers in Australia, a BMW K1200RS rider...

"G'dday Guys,

Thank you for your phone call this afternoon. Turned out funny as the Delivery lady had only dropped it off a few minutes prior and I was still opening the box.

Put it on and went for a quick 90km ride. Amazing. The stock seat is pretty good and I really bought the Sargent for looks as much as anything else, but am really impressed. It is really hard to define what part of your bum is actually touching the seat...no pressure points at all.

Local road here climbs 305 metres in some 2.5 kms and lots of peg scraping 15 and 25kph posted corners and it felt like I was floating above the bike the whole way up. Unreal feeling (you sorta had to be there).

Anyway, thanks again for the seat and the phone call."

Adapter Kit to Mount BMW Tubular Handlebars to R1100RT and R850/1100R

Larger picture

513-046

This kit allows replacement of stock, non-adjustable cast handlebars with BMW "Funduro" or other 22mm tubular bars. Stock controls can be used. Stock Cables are normally used but can vary with different handlebar designs. This beautifully designed & finished kit is constructed of aluminum alloy billet and is clear anodized for corrosion protection and matches the stock silver/gray finish.

BMW R850GS/R and R1150GS/R High Impact ABS Huggers

Larger picture

Dress up the look of your BMW and reduce spray with these highest quality rear huggers in black or carbon look.

BMW Tail Risers - Replacement Paralever

Larger picture

New: the Paralever pushrod, which was exclusively designed for Metisse's 160 PS strong Turbo-Boxer is now available for your bike:

Metisse have developed this exclusive part for their incredible Turbo-Boxer. Precise machined from a 4 kilo block of finest aircraft aluminium. The result is a beautiful, ca. 900 gram light part. For perfect finish and it is anodised in various colours, and fitted with a new, original BMW bearing (the original BMW paralever-pushrod weight is ca. 650 Grams).

Our Paralever pushrods have the following advantages:
- you can lift the tail of your BMW, so that it handles much better. Very good for heavy riders or rides with passenger and luggage, because the suspension then is under high compression and the handling gets worse. The higher rear end brings more weight to the front end. The lift of the tail, that we mention in the list below, is measured on brandnew bikes at the end of the tail.

- Our pushrods are 3 times stronger than the original part, wich is made from pressed aluminium sheet.

- We have designed our pushrod to protect the rear mounting of the paralever from underneath. This is a must if you take your bike Offroad (GS models), but also a protection on the road against stones, split, etc.

- Our pushrods have a very good finish, look much better and more technical than original, and give your bike a more exclusive look.

Material
CNC machined aircraft aluminium. Anodised. The front bearing is a new original BMW part, all this guarantees a very long life.

How to fit
Easy to fit.

Kit includes
Paralever pushrod, ready to fit. Bearing is already fitted. Mounting bolt.

Model		Part No.	Part No.	Part No.
		Silver	Blue	Black
R 1100 S, April 2000-	Nil	52bm03si	52bm03bl	52bm03sch
R 1100 S, April 2000-	20 mm	52bm01si	52bm01bl	52bm01sch
R 1100 S Boxer Cup Replica	Nil	52bm01si	52bm01bl	52bm01sch
R 1100 GS	Nil	52bm01si	52bm01bl	52bm01sch
R 1100 GS	20 mm	52bm02si	52bm02bl	52bm02sch
R 1100 R	Nil	52bm03si	52bm03bl	52bm03sch
R 1100 R	20 mm	52bm01si	52bm01bl	52bm01sch
R 1100 RT	Nil	52bm03si	52bm03bl	52bm03sch
R 1100 RT	20 mm	52bm01si	52bm01bl	52bm01sch
R 1100 RS	Nil	52bm03si	52bm03bl	52bm03sch
R 1100 RS	20 mm	52bm01si	52bm01bl	52bm01sch
R 1150 GS	Nil	52bm01si	52bm01bl	52bm01sch
R 1150 GS	20 mm	52bm02si	52bm02bl	52bm02sch
R 1150 GS Adventure	Nil	52bm01si	52bm01bl	52bm01sch
R 1150 GS Adventure	20 mm	52bm02si	52bm02bl	52bm02sch
R 1150 R + Rockster	Nil	52bm03si	52bm03bl	52bm03sch
R 1150 R + Rockster	20 mm	52bm01si	52bm01bl	52bm01sch
R 1150 RS	Nil	52bm03si	52bm03bl	52bm03sch
R 1150 RS	20 mm	52bm01si	52bm01bl	52bm02sch
R 1150 RT	Nil	52bm03si	52bm03bl	52bm03sch
R 1150 RT	20 mm	52bm01si	52bm01bl	52bm01sch

R850/1100R Handlebar Risers

Larger picture

513-057

(Fits both old & new "dash" styles) Moves bars up & back diagonally ~1" to unload weight from wrists & forearms and relax the neck. Uses stock control cables and requires no modifications. New bolts are supplied. They will work with the standard BMW windshield mounting kit.Clear anodized for corrosion protection and matches stock finish.Sold in pairs with new stainless steel cap screws.

Brake Pedal for R1100RT, R1100RS, R850/1100R and K1200RS

Larger picture

513-055

Beautifully machined clear anodized finish billet aluminum 1-1/4 x 2 inch brake pad with milled "pyramid" traction tread. Slips over tubular stock brake pedal and is secured with hidden set screw.

Cam Cap Covers - Clear Anodised

Larger picture

513-042

C. Cam Cap Covers

Fits All Oil Heads -Clear Anodized
	Aluminum billet replacement for leak-prone stock plastic Cam Cap Covers. Clear anodized for corrosion protection and matches engine silver/gray finish. Furnished with Viton O-rings. Sold by the pair

Cam Cap Covers - Chrome

Larger picture

513-060

Cam Cap Covers - Chrome

For R1200C Cruiser and Other Oil Heads with Chrome Kits!
	Chrome plated brass replacement for leak-prone stock plastic Cam Cap Covers. Furnished with Viton O-rings.

Footrest Lowering Kit - R1100 S

Larger picture

R1100S/F/

Available two lengths 30mm and 50mm

Leakproof Oil Filler Kit

Larger picture

513-045

Leakproof Oil Filler Kit

Fits all Oil Heads - Clear Anodised, Black Anodised and Chrome Plated

Billet replacement for theft, blow-out & leak-prone stock plastic oil filler assembly. Valve cover insert is nickel plated brass & threaded plug is anodized aluminum. Insert is secured by "trapped" set screws. Insert & plug are sealed by O-rings. Installation is simple but requires removal of valve cover. Kit is complete with insert, plug, Viton O-rings, set screws, allen wrench, stainless steel key chain mini-wrench for plug removal, dust cap and instructions.

Paralever Torque Arm - R1100S

Larger picture

513-05

Beautifully engineered and crafted replacement Paralever Torque Arm. Bright "deep etched" clear anodized finish aluminum billet with chamfered lightening holes. Maintains stock Paralever geometry. Very strong, very light, very racy!

BMW Metro Tank Panel, Black w/Small Bag

Larger picture

BMW Metro Tank Panel, Black w/Small Bag

Price $199.60 and $236.85 depending on model.

Sargent Super Bag w/Metro (Sport) Styling, Tank Panel Mounting Kit

Larger picture

LB-1220-01

Especially designed to work with the Sargent Metro Tank Panel System

Black Sargent Super Bag w/Metro (Sport) Styling to fit Metro Tank Panel

Steering Stop

Larger picture

51bm

If your bike falls over or if you have a crash, the original steering stops on the top fork yoke can break easily. This results in the forks turning to the point of damaging the tank and the Telelever, both of which are very expensive to repair.

Our steering stop is mounted on the Telelever and stops the fork shortly before they turn hard against the orignal yoke stop. The beautifully machined parts give your bike a more technical, exclusive look.

Top Box Backrest Pad

Larger picture

BMW Luggage Backrest Pad

Now, two designs - each to fit either the 33-liter or the 35-liter top case, the BMW Luggage Backrest Pad adds style and comfort to your touring set-up. Ready for do-it-yourself installation, the Backrest Pad may be finished off with a black cover to match your stock seat - or custom-covered to match a coordinating Sport Skinz seat cover or special Custom Services seat modification.

BACKREST PAD (33-LITRE):
To Match Stock - BR-2000-01
To Match Custom - BR-2000-02
Fits Part # 71 60 2 316 731

BACKREST PAD (35-LITRE):
(not shown, but looks similar to the 33-litre pad)
To Match Stock - BR-2038-01
To Match Custom - BR-2038-02
Fits Part # 46 54 2 316 287
All Topcase Pads come with installation instructions, template and hardware.

Y-Collector to replace Catalytic Converter

Larger picture

56bmy1

More Power and Torque For your R1150GS and R1150R

Our Y-collector replaces the original Catalytic Converter on the R 1150 GS and R 1150 R. The result:

- much more power
- much more torque
- much better sound (ca. 7 decibel louder and more aggressive sound)
- saves about 6 kilo on weight

Perfect craftwork and professional welding archive these advantages. The rear tube is opened before welded onto the
Y-section. Only this allows ferfect fit and perfect gasflow.

Shopping cart by ShopFactory